User`s manual

User’s Manual

www.dynacolor.com.tw

5.3.9 Saturation >

Move the cursor to the item and press ENTER to adjust the color saturation

of the camera using UP / DOWN keys. This value will be ignored on

monochrome monitors. The range of saturation values is <-128> to <127>.

The default setting is <0>.

5.3.10 Hue >

Move the cursor to the item and press ENTER for adjusting the hue of the

camera. Use UP / DOWN keys to adjust the value.

5.4 Record Setup >

The following three factors will effect the total record time of DynaGuard

100 MPEG-4 DVR:

• HDD capacity

• Recording Rate (Picture per Second)

• Image quality settings

The greater the recording rate and the higher the quality setting, the shorter

the recording time. Most of the related factors can be set here in this

submenu.

The Record Setup menu allows user to set recording quality, recording

schedules, and other recording parameters. Administrator's password is

required to access Record Setup menu. In the Main menu, move the cursor

to <Record Setup> and press ENTER. The following menu is displayed.

Record Setup

1. Record Mode

2. Schedule Setup

3. Preset Config

4. ezRecord Setup

5. Circular Recording

6. Purge Data

720×240@60PPS

Standard