User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
56
5.2.2 Monitor Brightness >
The function allows user to adjust the brightness of image displayed on the
monitor. Move the cursor to the item then press ENTER, and use UP / DOWN
keys to adjust the numeric value. The range of brightness values is <-128> to
<127>. The default setting is <0>.
5.2.3 Monitor Contrast >
The item is used to adjust the color contrast of image. The range of contrast
values is <-128> to <127>; the default setting is <0>.
5.2.4 Monitor Chrominance >
Move the cursor over the item and press ENTER for adjusting the
chrominance of image displayed on the monitor. Use UP / DOWN keys to
adjust the numeric value. The range of chrominance values is <-128> to
<127>; the default setting is <0>.
5.2.5 Screen Center Adjust >
The item is used to adjust the screen center of the main monitor display area.
Follow the steps to set the center point.
• Select <Screen Center Adjust> from the Monitor Setup menu and press
ENTER. The adjusting screen is as follows.
Screen Center Adjust
▲
◄ + ►
▼
• Position the screen center position using the Direction keys.
• Press ENTER to exit when finished.
5.2.6 Show Color Bar >
Choose this item to display a color bar pattern on the screen. The color bar
helps to adjust the monitor hue, saturation, text color, and display options.
Press ESC to exit the color bar pattern and return to the OSD menu.