User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
55
5.1.7.3 Bits >
User can specify the bits in a word that are associated with this protocol. The
available options are <6>, <7> and <8> bits. The default is <8> bits.
5.1.7.4 Stop >
User can specify the stop bit associated with this protocol. Options are <1>
and <2> stop bits. The default is <1> stop bit.
5.1.7.5 Parity >
This item is used to specify the parity associated with this protocol. Options
are <ODD>, <EVEN>, and <NONE>. The default is <NONE>.
5.1.8 Key Beep >
The item is used to enable or disable the key tone. Select <YES> to enable
the key tone, or <NO> to disable.
5.2 Monitor Setup >
The Monitor Setup menu allows user to tune the quality of the displayed
image. Select <Monitor Setup> from the Main menu and press ENTER. The
following menu is displayed.
Monitor Setup
1. Show Camera Title
2. Monitor Brightness
3. Monitor Contrast
4. Monitor Chrominance
5. Screen Center Adjust
6. Show Color Bar
7. VGA Resolution
YES
0
0
0
800x600
The following sections describe the items found in the Monitor Setup menu.
5.2.1 Show Camera Title >
This item allows user to choose whether to display the camera title on the
screen or not. The default is <YES>, which displays the camera titles with the
video.