User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
53
- IP >
The item is used to configure the IP (Internet Protocol) address of the unit.
The IP address is the identifier for your computer or device on a TCP/IP LAN
or WAN. Please note that to set a static IP address, DHCP must be set to
<OFF>.
- Netmask >
A netmask is a 32-bit mask used to divide an IP address into subnets and
specify the networks available hosts. Its value is defined by your network
administrator. It takes the form as ***.***.***.***, for example,
255.255.255.255.
This item allows user to enter the value of the Netmask for the unit. Please
note that to configure the item, DHCP must be set to <OFF>.
- Gateway >
Gateway is a node on a network that serves as an entrance to another
network.
Users are allowed to specify the IP address of the gateway or router
associated with this unit. To configure this item, DHCP must be set to <OFF>.
- DNS >
DNS is the abbreviation for “Domain Name Server”, which is an Internet
service that translates domain names into IP addresses. Because domain
names are easier to remember.
The item allows user to specify the IP address of the Domain Name System
associated with the unit. To configure this item, DHCP must be set to <OFF>.
If the server is unavailable when using DHCP, the unit searches for the
network server and boots up more slowly. This network search continues until
it times out.