User`s manual

User’s Manual

www.dynacolor.com.tw

NOTE: No power interruption is allowed during the software update.

Ensure that no power interruption can occur until the unit is

completely rebooted.

NOTE: Do not remove the external USB ThumbDrive

/CD-ROM

before the unit has completely shut down (hard drive and fan are off).

Removing the external USB ThumbDrive

/CD-ROM before shut down

can cause the system to update improperly.

5.1.2 Language >

The Language item allows user to select the language for the OSD menu and

screen messages. Language selection takes effect immediately when the

selection is done. Press UP / DOWN to select from listed languages and

press ENTER to confirm.

5.1.3 Date / Time >

User can set the current date, time and other OSD parameters in this menu.

The Administrator’s privileges are required for entering the submenu. In

System Setup menu, select <Date/Time> and press ENTER; the Date/Time

menu displays as follows.

Date/Time

1. Date

2. Time

3. Date/Time Display

4. Date Display Mode

5. Time Display Mode

6. Date/Time Order

7. Daylight Saving Time

8. DST Start

9. DST End

10. DST Bias

2005/02/21

10:39:26

1 Row

Y/M/D

24 HR

Date First

Apr, 1 st Sun, 02:00

Apr, Last Sun, 02:00

60 Min

NOTE: The reset date / time setting applies to record new video, the

date and time of previously recorded video will not be changed.

NOTE: To avoid record database corruption, after changed

Date/Time setting, clear the database is recommended.