User`s manual

User’s Manual

www.dynacolor.com.tw

5.1.1 Version >

The Version menu allows user to view system information such as hardware

and software version. From the System Setup menu, select <Version> and

press ENTER. The following menu is displayed.

Version

Hardware

Software

Software Upgrade via Local Device

V1.0

xxxx-xxxx-xxxx-xxxx

The items in this menu are described in the following subsections.

5.1.1.1 Hardware Version >

The item identifies the hardware version for this unit.

5.1.1.2 Software Version >

The item identifies the software version installed on this unit.

5.1.1.3 Software Upgrade via Local Device >

This item is used for updating the DynaGuard

100 MPEG-4 DVR software

by local device. The menu is displayed as follows.

Software Upgrade via Local Device

Upgrade Version

xxxx-xxxx-xxxx-xxxx

Select

Connect an USB drive contains upgrade software to the unit; the available

upgrade files will be listed in the menu. To update the system, select a file

and use UP / DOWN keys to choose <YES>. Press ENTER to confirm the

selection and start the upgrade process. The DynaGuard

100 MPEG-4

DVR uploads the software, updates the system files, and reboots

automatically.

The upgrade may take several minutes to save the changes in the memory of

the system. After reboot the unit, please check the software version again.