User`s manual

User’s Manual

www.dynacolor.com.tw

4.3 Searching Recorded Video

The DynaGuard

100 MPEG-4 DVR is capable of searching and playing

back recorded video by date and time or events. Entering the specific date

and time of the wanted video, the unit will then search for the matched video

and play it on the monitor. Alternatively, user can search event video by

selecting channel as well.

In live or playback mode, press SEARCH to enter the Search menu, which is

shown as follows.

----------Search By Time----------

From:

End:

Start Time:

2005/01/01 00:00:00

2005/05/01 00:00:00

2005/01/01 00:00:00

Begin Playback

----------Search By Event----------

Select Channel: CH1 CH2 CH3 CH4

Event List

4.3.1 Searching by Time

Follow the steps to search video by date and time.

• Press SEARCH key to enter the Search menu; the From Time and End

Time of the available video is listed on top of the screen. The value is

unchangeable.

• Use Direction keys to move the cursor for setting the Start Time; adjusting

the date and time values by UP / DOWN keys.

• Press ENTER to confirm the settings or ESC to abort.

• Move the cursor to <Begin Playback> and press ENTER to start playing

back the selected video.

• Either press PLAY/STOP again to return to live video.

NOTE: If there is no available recorded video that matches your

specified time and date, the unit starts playback from the next

available video.

NOTE: The date/time information will be shown on the screen with a

DST icon if the Daylight Saving Time function is enabled. “S”

indicates summer time and “W” indicates wintertime.