User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
31
Pause Playback and Single Step Forward
To pause and resume recorded video, follow these steps.
• Press one of the CHANNEL keys to display the corresponding camera in
full screen.
• Press FREEZE to pause the current playback image.
• Press RIGHT / LEFT Direction keys to move the video single step reverse
/ forward. Press and hold RIGHT / LEFT keys to reverse / forward the
video single step continuously.
• Press FREEZE again to resume the playback operation.
Viewing Live Image in Playback Mode
Press the MODE key repeatedly in playback mode, a 16-window viewing
mode contains both live and playback image appears. This view mode is
illustrated as the following figure.
The eight windows on the top side of the screen are used to view the Live
video from channel 1 to channel 8 respectively, and the other windows allow
user to view Playback image from channel 1 to channel 8.
4.2 Sequence Setup
This section introduce you how to view in sequence mode with both Main
Monitor and Call Monitor, if connected. Sequence function can avoid
manually backtracking and give more flexibility while surveillance.