User`s manual

User’s Manual

www.dynacolor.com.tw

3.6.4 To Record Event Video Only

If you want your DVR unit to start recording only under the alarm is triggered

and , follow the steps:

• Enter the OSD setup menu with correct password.

• In the OSD setup menu, select <Record Setup> menu. Move the cursor to

the item <Preset Config>, and select <Event only>.

Refer to Section 5.4.3 Preset Record Configuration for more detailed

information.

4. Basic Operation

The DynaGuard

100 MPEG-4 DVR allows user to access some general

operations through the front panel easily. The following sections introduce the

general operations of the unit.

4.1 Viewing Live / Playback Video

The general functions in live and playback mode are described in the

following sections.

4.1.1 Viewing Modes

The DynaGuard

100 MPEG-4 DVR supplies user versatile ways of viewing

both live and recorded video. Following presents these view formats.

Viewing in Full Screen

Press any CHANNEL key directly to view the corresponding camera image in

full view format.

Viewing in Multi-window

Various multi-window view formats are offered for selecting. To switch

between available viewing formats, press MODE repeatedly.