User`s manual

User’s Manual

www.dynacolor.com.tw

3.5.2 Schedule Setup

The Schedule Setup is used to set the day and night time, or weekend

recording schedule. Select <Schedule Setup> from the Record Setup menu

and press ENTER; the following menu is displayed.

Schedule Setup

1. Day Time Start

2. Night Time Start

3. Weekend Schedule

4. Weekend Start

5. Weekend End

06:00

18:00

YES

Fri 18:00

Mon

06:00

• Make appropriate changes of the start time of Day and Night Time using

Direction keys.

• Press ENTER to confirm the settings or ESC to cancel.

• If you want to have a weekend record, choose <YES> to enable the

Weekend Schedule in advance and then set the Weekend Start/End time.

• Press ESC to back to previous page.

3.5.3 Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame

rate. In normal circumstances, we strongly suggest you set the item to

<Standard>, the default. Below tables show the PPS and picture size under

<Standard> in Full-D1 mode, Half-D1 mode and CIF mode, respectively:

Halfl-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)

Normal PPS Normal Size Event PPS Event Size

3.75 NTSC

(3.125 PAL)

11 KB

15 NTSC

(12.5 PAL)

17 KB

Detailed settings offered in the <Preset Config> menu, please refer to

Section 5.4.3 Preset Record Configuration.