User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
24
3.4 System Date / Time Setting
User can set the current date, time and other OSD parameters in Date/Time
menu. The administrator’s privileges are required for entering the submenu.
In OSD Main menu, select <System Setup> and press ENTER, then select
<Date/Time> to access the Date/Time menu; the menu displays as follows.
Date/Time
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time
8. DST Start
9. DST End
10. DST Bias
2005/02/21
10:39:26
1 Row
Y/M/D
24 HR
Date First
ON
Apr, 1 st Sun, 02:00
Apr, Last Sun, 02:00
60 Min
3.4.1 Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER for adjusting the settings.
LEFT / RIGHT keys are used to move the cursor to previous or next field,
ENTER is for selecting, and UP / DOWN are used to change the value in
the selected field.
NOTE: The reset date / time setting applies to record new video,
the date and time of previously recorded video will not be
changed.
NOTE: If you have to change data/ time settings in any cases,
we strongly recommend you to format the HDDs in order to
avoid the recorded database corruption.
Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2
rows. Use the UP / DOWN keys to change the setting. The default is to
display the date / time OSD in one row.