User`s manual

User’s Manual
www.dynacolor.com.tw
All rights reserved
19
3.1 Front Panel
The front panel controls enable user to control the unit and preset the
programmable functions.
3.1.1 LED Definition
The DynaGuard
TM
100 MPEG-4 DVR LEDs on the front panel are described
as follows.
Power LED (Green)
The LED lit during the period when the correct power is connected.
Network LED (Green)
The LED should be lit when DynaGuard
TM
100 MPEG-4 DVR is connected to
a network and blink when the data is being transferred.
Alarm LED (Red)
The LED should be lit during an alarm is triggered.
REC LED (Green)
The LED should blink while the DynaGuard
TM
100 MPEG-4 DVR is
recording.
HDD LED (Yellow)
The LED should be lit while the HDD is processing data to or from the HDD.