User`s manual

User’s Manual

www.dynacolor.com.tw

LAN Connector (RJ-45)

The DynaGuard

100 MPEG-4 DVR is capable of networking. The LAN port

opens the door of DynaGuard

100 MPEG-4 DVR to Ethernet.

USB Connector (x2)

There are two USB2.0 ports on the rear panel for users to connect external

USB devices to the unit, such as ThumbDrive

or CD-ROM.

Power Jack

The DynaGuard

100 MPEG-4 DVR has a free voltage AC power

connection jack. Please connect the power supply that ships with the unit.

NOTE: Use of other power supply may cause overloading.

Power Switch

Used to power up and shut down the unit.

3. General System Setup

The DynaGuard

100 MPEG-4 DVR allows user to access some general

operations through the front panel easily. The following subsections introduce

the general operations of the unit.

The regular displayed OSD information and its displayed positions are shown

as following figure. The channel title will be displayed on the top-left side of

the window, either in full screen mode or in multiple channel mode. The

current operating mode, including Call mode, Dome-Control mode, Playback

mode. Freeze mode and Sequence mode, will be displayed on the

bottom-left side of the screen. And the date/ time information will be display

on the bottom-right side.

Ch4

Playback

2005/11/09 PM04:31:22