User Manual

Description String Parameter Range Example
Set playback intensity pb<playback index>/in int 0 → 100 pb01/in=55
Get playback intensity pb<playback index>/in - - pb00/in
Increment playback intensity pb<playback index>/in=++ int -100 → 100 pb01/in=++10
Decrement playback intensity pb<playback index>/in=- - int -100 → 100 pb01/in=–10
Set playback speed pb<playback index>/sp int -100 → 100 pb33/sp=-20
Get playback speed pb<playback index>/sp - - pb00/sp
Increment playback speed pb<playback index>/sp=++ int -100 → 100 pb33/sp=++10
Decrement playback speed pb<playback index>/sp=- - int -100 → 100 pb33/sp=–10
Control playback button
1
pb<playback index>/bu int 0 / 1 pb59/bu=1
Control playback flash pb<playback index>/fl int 0 / 1 pb64/fl
Get active cue pb<playback index>/cue - - pb01/cue
Release playback pb<playback index>/re - - pb10/re
Playback go forward pb<playback index>/go+ - - pb21/go+
Playback go back pb<playback index>/go- - - pb21/go-
Playback jump pb<playback index>/ju int 1 → 48 pb45/ju=17
Set all intensity pbxx/int float 0.0 → 1.0 pbxx/int=0.5
Get all intensity pbxx/int - - pbxx/int
Set all speed pbxx/spd float -1.0 → 1.0 pbxx/spd=0.5
Get all speed pbxx/spd - - pbxx/spd
Get all active Cues pbxx/cue - - pbxx/cue
Get all playback status pbxx/ac - - pbxx/ac
Release all playbacks release - - release
Hello API hello - - hello
Set blackout blackout int 0 / 1 blackout=1
1
This command mimmics the button in the Cuety interface. It can be short-
pressed for Go+ and long-pressed for Release. It expects a =1 first, and then
=0. The time between these commands determine wheter it is a long-press or
a short-press.
46