User Manual

Table Of Contents

5.1.1 Devices

Here you can choose your LPU device from the list. Once your LPU is selected

it will be possible to change the IP address of the unit. When changing the IP

be careful to keep it within the IP range of your tablet. Moving the IP address

of your LPU outside this range will result in the device disappearing from the

list. In this case press the physical reset button shortly on the LPU to switch

back to DHCP (red LED) or press it long to revert back to the default static

IP address (white ﬂashing LED) which is 192.168.1.10.

Device Lock

The selection of the device can be locked. The lock prevents accidental de-

selection of the LPU. Select the device and then press the ’IP Address’ button

for 10 seconds. A lock icon will appear, see 5.2.

Figure 5.2: Device Lock

Art-Net & sACN

You can also enable the Art-Net and/or sACN protocols. These protocols are

not required for normal use of the Cuety system. The protocols will allow you

for instance to connect to a 3D visualizer for rendering your lighting rig.

5.1.2 Show ﬁles

All the show data is located in the LPU hardware, however, it is possible to

create a backup show ﬁle on a tablet. This show ﬁle can later be read back by

the LPU.

Please note that when creating a new show ﬁle this ﬁle will be empty; you still

need to ’save’ the ﬁle for it to contain the current patch and cue information.

The ﬁles will be stored at the following location:

• Windows: C:\Users\[username]\Documents\Visual Productions\Programmer\