User Manual

You switch the LPU to a static IP address by briefly pressing the reset button on
the device (Figure 4.5). When set to static, the heartbeat LED on the LPU will
indicate white. Static IP addresses are useful when you have no DHCP server
in your network, for instance when you make a direct peer-to-peer connection
between your LPU and your tablet/computer. It is also useful in case you
want to make sure that the IP address of the LPU will never change, e.g. in a
permanent installation.
When using static IP addresses you have to make sure that all equipment on
your network have unique IP addresses.
You can also change the IP settings from inside the Cuety App.
4.4.2 Reset
By pressing the reset button on the device (Figure 4.5) for 3 seconds or more,
you will reconfigure the unit to the factory default IP address and sub-net mask.
No other settings will be changed. The default IP address is 192.168.1.10 with
the sub-net mask set to 255.255.255.0
Figure 4.5: Reset switch
If you wish to fully erase the patch and playback memory in the LPU then you
can perform a ’Factory Defaults’ by using the vManager software tool. This
tool is discussed on page 39.
22