Installation & Assembly

ASSEMBLY INSTRUCTIONS

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Join parts (D), (E) & (F) together by tightening washer (a) and nut (b). Tighten

with wrench (G).

2. Attach the handle of shade (A) to socket tube (B).

3. Insert light bulb into socket.

4. Remove red protective plastic from electrical plug.

5. Plug into proper outlet.

6. Assembly is complete. The lamp is ready for use.

ADJUSTMENT INSTRUCTIONS:

1. To adjust the height of lamp ﬁxture, hold the lower pole steadily, pulling or

pushing inner pole (C) to desired height.

DRY

Studio Adjustable Floor Lamp

Item # 91025

PAGE 1
ASSEMBLY INSTRUCTIONS Studio Adjustable Floor Lamp Item # 91025 INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. 1. Join parts (D), (E) & (F) together by tightening washer (a) and nut (b). Tighten with wrench (G). 2. Attach the handle of shade (A) to socket tube (B). 3. Insert light bulb into socket. 4. Remove red protective plastic from electrical plug. 5. Plug into proper outlet.