Installation Sheet
SC4000
ASSEMBLY & INSTALLATION GUIDE
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1. Attach mounting strap (A) to outlet box with mounting screws (B) provided.
2. Attach ground (silver in color) fixture wire to ground wire from ceiling outlet box (usually green or copper in color),
and fasten together with a plastic wire connector. Tightly wrap the wire connector with electrical tape so the end of
the connector is sealed.
IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE PROPERLY GROUNDED.
3. Connect the neutral (white) fixture wire to the neutral (usually white) wire from ceiling outlet box. Fasten both wires
together with a plastic wire connector and tightly wrap the wire connector with electrical tape.
4. Repeat the procedure with the hot (black) wires. Always make sure that no wire strands are left outside the
connectors.
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
5. Insert threaded nipple (C) into center hole of mounting strap (A).
6. Remove canopy ring (F) from threaded socket cover (D).
7. Attach canopy to socket cover (D), letting the socket cover pass through center hole of canopy (E).
8. Screw canopy ring (F) to socket cover (D) to secure canopy (E) to ceiling.
9. Insert light bulb into socket.