Installation Sheet

13. Insert bulbs (not included) into the sockets.

14. Attach the rubber washer (Q) to either side of the glass panels (R) and secure to the bottom

of the fixture body with the finial (S).

15. Installation is complete, turn on power at fuse or circuit breaker.

***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.

Cadence Large Single-Tier Flush Mount

Item # S 4652

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO

REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND

INSTALLATION ARE FINAL.

ASSEMBLY INSTRUCTIONS

Bulb(Not included)

Junction box

L(42PCS)

Cable lock nut

Safety cable

TO assemble safety cables:

1.Join fixture safety cables with safety

cable from ceiling.

2.Wrap both safety cable around the

cable lock nut.

3.Insert screws into both holes on cable

lock nut,secure screws with screwdriver.

4.Push the cable lock nut into outlet box.

DAMP