Installation Sheet

S1100
ASSEMBLY & INSTALLATION GUIDE
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1. Join parts (F), (G) & (H) together by tightening washer (I) & nut (J) to threaded nipple of pole (F). Tighten with wrench
(K) provided.
2. Pull the wire from until taut.
3. Remove socket ring (C) from the socket (A).
4. Attach lamp shade (B) over top threaded section of socket (A), screw socket ring (C) onto threaded socket (A) to
secure shade to socket. Tighten with fork (D).
5. Insert light bulb into socket.
6. Remove plastic cover (M) from electrical plug (L).
7. Plug lamp into wall outlet.
8. ADJUSTMENT INSTRUCTIONS:
1. Loosen adjustment key found on lamp stem.
2. Adjust lamp by pulling or pushing lamp pole (E) up or down to desired height.
3. Tighten the adjustment key.