Installation Sheet

ASSEMBLY INSTRUCTIONS

Prescott Large Semi-Flush Mount

Item # KS 4407

DAMP

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED

ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. Carefully remove all parts from the carton.

2. Remove mounting plate (A) from canopy (D) by removing base screws (C) in counter-clockwise

direction.

3. Affix mounting plate (A) to ceiling outlet box with mounting screws (B) provided.

4. Attach ground (green or green/yellow) wire to ground wire from wall outlet box (usually green or

copper in color ), fasten together with a plastic wire connector. Tighten wrap the wire connector

with electrical tape. so the end of the connector is sealed. IT IS IMPERATIVE THAT THE

OUTLET BOX IN YOUR HOME BE PROPERLY GROUNDED.

5. Connect neutral (white ) fixture wire coming from fixture base to neutral (usually white )

outlet wire. Fasten both wires together with a plastic wire connector and tightly wrap the

wire conncetor with electrical tape.

6. Repeat the procedure with the hot (black) wires. Always make sure that no wire strands are

left outside the connectors. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS

OTHERWISE SAFETY WILL BE UNCOMPROMISED.

7. Insert light bulbs into sockets.

8. Loosen set screws (F), attach glass shade (G) (packed separately) to shade holder (E) and secure

by tighten set screws (F). DO NOT OVER TIGHTEN OTHERWISE THE GLASS WILL BE DAMAGE.

9. Restore power and text fixture. Installation is completed.

*** Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.