Installation & Assembly

ASSEMBLY INSTRUCTIONS

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

1. For safety purposes, do not afﬁx the shades before mounting to the wall.

2. Remove the mounting plate (2) from the base of the lighting ﬁxture (4) by

removing the base screws (5) in counter-clockwise direction.

3. Afﬁx the mounting plate (2) to the wall with the mounting plate screws

provided (3).

4. To connect the wire, remove the plastic wire protector. Connect the ground

wire (green) to the green wire from the wall outlet, connect the neutral (white)

ﬁxture to the neutral (white) outlet wire, and hot (black) ﬁxture wire to the

hot (black) outlet wire. Fasten the Neutral (white) and hot (black) connection

seperatley with a plastic wire connector and tightly wrap each connectors.

DO NOT REVERSE THE HOT OR NEUTRAL CONNECTIONS OR SAFETY

WILL BE COMPROMISED.

IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE

PROPERLY GROUNDED.

5. Attach ﬁxture (5) to the mounting plate (2). Tighten ﬁxture (5) with the base

screws (4).

6. Remove socket rings (8) from the sockets (6).

7. Put the shades (7) on the top of sockets (6) and tighten them with socket rings

(8). Insert light bulbs (not included) into sockets.

DRY

(

(2)

(4 )

(5)

(3)

(8)

(7)

(6)

Boston Functional Double Light

Item # SL2932

PAGE 1
Boston Functional Double Light Item # SL2932 ASSEMBLY INSTRUCTIONS WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. 1. For safety purposes, do not affix the shades before mounting to the wall. 2.