Installation Sheet

1. Carefully remove all parts from the box.

2. Put the lanter onto the pose.

3. Connect the fixture Ground (bare) wire with the ground wire from the outlet box using

wire nut (A). If your house does not have ground wire, then attach this wire to the

green grounding screw inside of the outlet box.

IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.

4. Connect the fixture Neutral wire (WHITE) with the neutral wire from the outlet box

using wire nut (A).

5. Connect the fixture Hot (BLACK) wire with the hot wire from the outlet box using wire nut (A).

DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL

BE COMPROMISED.

6. Tuck wire connections neatly into bottom box.

7. Use provided screw (B) to fix the lantern on the post.

8. Insert bulbs (not included) into the sockets.

9. Place glass panels (D) on the frame (C) and screw it by bending the metal tabs.

10. Place glass panels (G) on the frame (C) and screw it by bending the metal tabls,and make

sure the glass panels outside with plastic rod.

11. Installation is complete, turn on power at fuse or circuit breaker.

***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.

Darlana Outdoor Post Light

Item # CHO 7113

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A

LICENSED ELECTRICIAN.

WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

WET