Installation Sheet

ASSEMBLY INSTRUCTIONS

WE RECOMMMEND INSTLLATION OF THIS LIGHTING FIXTURE BE DNE BY A

LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

11. Afﬁx mounting plate (B) to the ceiling outlet box by aligning mounting holes

with center hole of plastic anchors (A), inserting mounting screws (C) to secure

mounting plate (B) to the wall.

12. Attach lantern base (E) to mounting plate (B) and tighten with base screws (D).

13. Insert light bulbs (not included) into sockets.

14. Close the door (G) by inserting locking pins (J).

INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/OR IN WET

LOCATION:

1. Mounting surface should be clean, dry, ﬂat and 114” larger than canopy/ﬁxture

base on all sides.

2. Any gaps between the mounting surface and canopy exceeding 3/16” should

be corrected as required. With silicone (ex. GE-108) caulking compound, caulk

completely around where back of canopy meets the wall surface to prevent

water from seeping into outlet box.

Club Large Square Flush Mount

Item # CHO4311

DAM P