Installation Sheet

ASSEMBLY INSTRUCTIONS

WE RECOMMMEND INSTLLATION OF THIS LIGHTING FIXTURE BE DNE BY A

LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN

FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS

ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/OR IN WET

LOCATION:

1. Mounting surface should be clean, dry, ﬂat and 1/4” larger than canopy/

ﬁxture base on all sides. Any gaps between the mounting surface and canopy

exceeding 3/16” should be corrected as required.

2. With silicone (ex. GE-l 08) caulking compound, caulk completely around where

back of canopy meets the wall surface to prevent water from seeping into

outlet box.

Club Small Square Flush Mount

Item # CHO4310

DRY