Installation Sheet
ASSEMBLY INSTRUCTIONS
Outlet Box
B
Bulb
F
D
E
C
G
H
(No Included)
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1. Thread tube (G) into the wire box on the canopy (E).
2. Hang all glass beads (H) to the holes on canopy (E) and disc (J), as shown in
the diagram. YOU SHOULD HAVE THIRTY SIX (36) STRANDS OF GLASS
BEADS.
3. Install the mounting plate (B) with screw(C) to outlet box in your ceiling by
using mounting screws (D) provided.
4. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME BE
PROPERLY GROUNDED. If your outlet box DOES NOT have a GROUND
WIRE, be sure to insert the green ground screw into the mounting plate (B)
facing DOWN, and wrap the fixture’s bare copper ground wire around the
ground screw on the mounting plate. If your outlet box has a GROUND WIRE
(green or bare wire) attach this wire to the bare copper GROUND WIRE of the
fixture. Fasten with a plastic wire nut (A) and wrap with electrical tape.
5. Carefully inspect the two fixture wires. One has very fine ridges molded into the
plastic covering – this is the NEUTRAL WIRE. The second wire’s covering is
smooth – this is the HOT WIRE.
6. Connect the NEUTRAL WIRE from the fixture to the NEUTRAL JUNCTION
BOX WIRE from the outlet box (usually white). Fasten each together with a
plastic wire nut (A) and wrap the connection with electrical tape. Be sure that
no wire strands are exposed.
7. Connect the HOT WIRE from the fixture to the HOT JUNCTION BOX WIRE
from the outlet box (usually black). Fasten each together with a plastic wire nut
(A) and wrap the connection with electrical tape. Be sure that no wire strands
are exposed. Let screw(C) get through the holes on canopy (E), and secure
with ball nut (F).
8. Install the light bulbs (not included) into sockets.
Medium Paris Flea Market Flush Mount
Item # CHC4207