Installation Sheet

ASSEMBLY INSTRUCTIONS
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
11. Affix mounting plate (B) to the ceiling outlet box by aligning mounting holes
with center hole of plastic anchors (A), inserting mounting screws (C) to secure
mounting plate (B) to the wall.
12. Attach lantern base (E) to mounting plate (B) and tighten with base screws (D).
13. Insert light bulbs (not included) into sockets.
14. Close the door (G) by inserting locking pins (H).
15. INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/OR IN WET
LOCATION:
a. Mounting surface should be clean, dry, flat and 1/4” larger than canopy/
fixture base on all sides. Any gaps between the mounting surface and canopy
exceeding 3/16” should be corrected as required.
b. With silicone (EX. GE-108) caulking compound, caulk completely around
where back of canopy meets the wall surface to prevent water from seeping
into outlet box.
DAM P
Club Large Hexagonal Flush Mount
Item # CHC4126