User manual

Appendix - AV Breakout Cables
Harmony 2ES and 4ES 73
Audio lines need to be quality audio wire. An example of a
compatible audio cable is the Assmann Electronics AK243-2 3.5
mm stereo to 2 phono plugs cable (www.assmann.com). Note
that two separate audio cables will be required to connect all 4
channels: one cable for channels 1 & 2 and the other for
channels 3 & 4.
Ensure that all leads are properly grounded within the D-Sub
and that proper strain relief is provided to prevent separation
of wires from the pins or connectors. Also ensure that all
connectors, whether BNC, RCA, or other are of high-quality
material so as not to break the 75-ohm impedance of the line.