User manual

Appendix - AV Breakout Cables

72 Harmony 2ES and 4ES

AV Breakout Cables

Specifications

75-ohm resistance is recommended for all cables used for video

outputs and inputs.

When attaching the leads, solder cup connectors work fine, but

crimp type pins provide more durability and hold up better

under strain. An example of a cable that works well for video is

the Belden series 9221 mini-coaxial cable (www.belden.com),

but other cable manufacturers can also be used.

Feature Description

Physical

Length = 9.4'' (239mm)

Height = 4.25'' (108mm)

Connectors

25-pin D-Sub (use with universal breakout cable.)

Dual 3.5 mm jacks for digital audio output.

Power

All active channels:

• 10.5w Typical (playback to TV)

PCI Voltages

• +3.3V 2.8A (TV)

• +12V 0.09A

• -12V Not used

Audio

Parameters

Sampling rates supported:

• 32khz,

• 44.1 khz,

• 48khz,

• 96 khz

Frequency response:

• 20hz - 22khz +/- .5db

MPEG layer 2 audio, Dolby Digital

• Stereo 16 bit,

• 20 bit,

• 24 bit output,

Passes Dolby Digital via S/PDIF connector.

Volume, balance software controllable

Software controllable mute

Software controllable stereo channel routing (mono, dual

mono, right or left, etc.)

Audio output level: -10dB

Audio output impedance: 10K Ohms/unbalanced