User manual

Troubleshooting
64 Harmony 2ES and 4ES
• Harmony: HARDWARE ERROR
Inspect the decoder board for damage.
Verify that the motherboard has 3 volts available in the
PCI slots.
Remove the board and re-install.
MPEG does not play from mapped network drive
• This will not work unless network = 1, see Network on
page 46 for details.
Mouse lags and overall poor system performance
• Verify ATA 133 to ATA 33 compatible components and
drivers. A different IDE bus driver may be required for
proper system performance.
Multiple board server - channels mapped incorrectly
When configuring a server with both 2 and 4-channel boards,
the driver incorrectly maps the channel indexes to board / chip
index.
Example
A 10 channel configuration CPU, 4-ch board, 4-ch board,
and a 2-ch board, with the 2-ch board installed in the slot
the farthest away from the CPU.
The device setting in the registry looks like this: