User manual

Installation Guide
18 Harmony 2ES and 4ES
Starting Playback
Now that Harmony card is installed:
1. Verify that all software applications are closed.
2. Run
Harmony Vidserve, the playback application located
under Focus Enhancements’ programs.
3. Browse for the MPEG file desired and open it.
4. Click Load and wait for the position counter to stop
moving.
5. Click
> to start playback.
To pause play, click on
[ ].
6. Repeat the same process to open clips in channels 2, 3,
and 4.
7. To change to Card 2 and display its channels, click on
button
2.
Additional information about the Harmony Vidserve main
window controls are listed in the following table.
Harmony Vidserve Controls
Control Description
Open Opens (loads) the MPEG file selected.
Ò Plays or resumes play of a stopped file which has
been opened (loaded).
[ ] Stops a playing channel.