User manual

Installation Guide
Harmony 2ES and 4ES 11
Part 1: Installation Instructions (Hardware)
To complete this installation, it is necessary to point the system
to the driver installation disc when prompted by Windows.
The
harmony.inf file, included on the driver installation disc,
should be installed for each of the video channels.
1. Install the decoder card(s) according to the board’s user
manual.
• Power up the computer and log in to Windows.
• The Hardware Manager recognizes that new hardware is
in the system and a message box appears stating that
Windows has found new hardware.
•Click
Next to continue.
Uninstall Earlier Versions of Focus Enhancements Cards
If you have previously installed a different type of Focus Enhancements
decoder card, or a different version for the Harmony decoder series, it is
recommended that you uninstall that driver before proceeding.
Installation and use with Windows 2000, requires Windows 2000
Service Pack 2 or higher.
System Identifies Harmony as Multiple Devices
Depending on the Harmony card installed, each channel on the board
appears as a unique device (2 or 4) to the system. During installation, the
Windows to installation wizard prompts for a driver for each individual video
channel.