User manual

Harmony 2ES and 4ES 7
Installation Guide
The Focus Enhancements Harmony 4ES decoder board is a 3/4
sized PCI card. The card is secured using an IO mounting
bracket secured to the chassis. This bracket is affixed to the 25-
pin female D-Sub output of the board.
Verify Harmony Card is Properly Seated in PCI Slot
If a card is not seated securely in the PCI slot when the system power is
applied, damage to the Harmony 4ES board may occur. It is possible to
damage system components, primarily the system's main board, if power is
applied to an improperly seated card.
Do Not Force Board into PCI Slot
Whenever installing a board, never force the board into position. During the
installation if pressure or tension is noted, stop immediately and refer to the
chassis manufacturer's specifications for card installation and placement.
ESD
Follow all necessary precautions when handling electrical circuit boards.
Damage can occur due to frictional contact with board circuitry or due to
electrostatic discharge (ESD).