User manual

Overview
Harmony 2ES and 4ES 3
Cabling
There are two cabling options for connecting the video servers
to output devices and both follow all standard audio/video
cabling procedures.
•
Universal Cable:
This cable supports all board configurations and comes
as a 16-inch cable which attaches to each board’s DB 25.
All output connectors are RCA female type, requiring
appropriate adapters and patch cables. For more
information, see
Universal Cable on page 75.
•
Audio Cables
Cables with 1/8 inch (3.5 mm) stereo phone plugs to
two phono (RCA) plugs may be used to connect the
Harmony 4ES digital audio outputs to an external
audio receiver/decoder. The output labeled
CH1/2 is
designated for channels 1 & 2 and the output labeled
CH3/4 is designated for channels 3 & 4.
Focus Enhancements does not carry cable adapters and
accessories. For cable pinout see
AV Breakout Cables on page 72.