User manual

Project creation and build UM0036
92/385 Doc ID 7705 Rev 11
4.6.3 ST Post-Link tab
The ST Post-Link tab allows you to view any instructions that entail post-link actions that
result from the options or settings that you have made in the other tabs of the Project
Settings window. Specifically, during the post-link step, a listing with absolute addresses
that are used by the debugger is generated. You cannot edit the entries in this window
directly.
Figure 61. ST Post-Link tab
Table 30. Formats for OBSEND output
Format Description
Intel Hex (i) Intel hexadecimal format
Intel Hex extended (ix) Intel hexadecimal format allowing 32 bit addressing
Motorola S-record (s) Motorola hexadecimal format with 16 bytes of data per line