User manual

UM0036 Your STVD graphical environment
Doc ID 7705 Rev 11 59/385
to enter commands directly. However, in Section 5.18: Online commands on page 199, you
will find several basic online commands for reference.
This command console (shown in Figure 41) displays online output and allows you to enter
commands at the command prompt, marked by '–>'.
Figure 41. Output window, Console tab
Caution: Under normal circumstances, the workspace must not be opened or closed, or a Quit
Debugger command issued, from within this window. The STVD graphical user interface
must be used for these operations.
The STVD graphical user interface is not refreshed systematically following direct entry of
commands, therefore use of the Run command within the command console should be
approached with caution.
Right-click anywhere in the Console tab to open the console contextual menu.
Figure 42. Console tab contextual menu
The contextual menu provides options to edit online commands (Cut, Copy, Paste) plus
logging options (Log to file and Log commands to file) with file-creation options in each
case (Log file and Commands log file).
Option Verbose On/Off defines the level of comment displayed on screen.