User manual

UM0036 EMU3 emulator features
Doc ID 7705 Rev 11 305/385
1. From the main menu, select Debug Instrument > Advanced Breakpoints.
2. In the Advanced Breakpoints window, click on the Level1 tab, then on the Event1
tab.
3. In the Memory Events area, select Any Memory Access from the drop down menu as
shown in Figure 239.
Figure 239. Programming the memory access
The Memory Access dialog box opens. To define the memory zone, enter the starting
address, 0x40, in the From Address field, and the end address, 0x47, in the To field.
The length of the zone is automatically calculated and entered in the Length field. In
the Access mode drop-down list, select Read/Write, so that either type of access
triggers a breakpoint.
Figure 240. Memory access dialog box
4. Click OK.
5. Click on the first THEN button to open the tab to define the action to take if the memory
event defined is TRUE. Check the Break option as shown in Figure 241.