User manual

UM0036 EMU3 emulator features
Doc ID 7705 Rev 11 297/385
Figure 228. Memory events
An event may be defined as one of the following types of memory access:
● Any Memory Access: A specified memory address or range of addresses is accessed
by a read or a write command.
In the dialog box shown in Figure 229, you must specify two of the following fields: a
start address (for the start of a range of addresses), an end address (the end of a
range of addresses) or the length of the address range. If you want to monitor a specific
address, enter the address in the From Address field, and enter a Length of zero
(“0x1” in hexadecimal format). You may also specify the access mode: a read access, a
write access, or either a read or write access.
Figure 229. Memory Access dialog box
● Memory Access with Data: A specified data value or range (or specified bit mask) is
accessed (read/written) at a specified memory address or specified address range.