User manual

EMU3 emulator features UM0036
290/385 Doc ID 7705 Rev 11
Figure 221. Show/hide columns
Columns may also be shifted right or left for convenience of use. Pick up the column header
with the left mouse button and drag to the location required.
The Trace window in Figure 222 has been set up to show only the Record, Address, Data,
Event, Disassembly and Hexadecimal columns.
Figure 222. Customized trace window
10.1.3 Emulator commands
This option in the Trace contextual menu gives access to the following commands:
● Clear Trace buffer: This option erases all information currently contained in the Trace
buffer.
● Trace On: When the trace function in on, records are numbered sequentially and
stored in memory. The Trace window is automatically updated when the program is
stopped. This option turns the Trace function on—re-clicking the option toggles the
trace off. Note that you may also activate the Trace using the Advanced Breakpoints
window (via the BEM)—but doing so disables the Trace On/Off command in the Trace
Contextual menu.
● Set Timestamp Clock...: This option opens the Timestamp Clock dialog box shown in
Figure 223.