User manual

UM0036 Getting started with STVD
Doc ID 7705 Rev 11 29/385
Figure 7. Project configurations window
3. To view the project settings that have been applied, select Project > Settings.
The Project Settings window opens and you can view the options for your toolset’s
Compiler, Assembler and Linker, among others. You can also customize these options.
For more information about the available options for your toolset, refer to Section 4.5:
Configuring project settings on page 84.
2.4.2 Build commands and output
Once you have selected your MCU and configured all the options for building, use the
commands in the Build menu to build and rebuild your application, or compile your source
files. When STVD builds your application the command lines and any warnings, errors or
other build information are displayed in the Build tab of the Output window.
Figure 8. Output window Build tab