User manual

UM0036 STice features
Doc ID 7705 Rev 11 265/385
select Column Display in the Trace contextual menu. This opens a list of all the
columns available in the trace record.
Figure 200. Show/hide columns
Columns may also be shifted right or left for convenience of use. Pick up the column
header with the left mouse button and drag to the location required.
The Trace window in Figure 201 has been set up to show only the Record, PC, Instr
event, Hexa code, Disassembly, R addr, R value, R event, W addr, W value and W
event columns.
Figure 201. Customized trace window
9.1.3 Emulator commands
This option in the Trace contextual menu gives access to the following commands:
● Clear Trace buffer: This option erases all information currently contained in the Trace
buffer.
● Trace On: When the trace function in on, records are numbered sequentially and
stored in memory. The Trace window is automatically updated when the program is
stopped. This option turns the Trace function on—re-clicking the option toggles the
trace off. Note that you may also activate the Trace using the Advanced Breakpoints