User manual

UM0036 Getting started with STVD
Doc ID 7705 Rev 11 25/385
2.2.2 Create a project in your workspace
Figure 2. New project window
In the New Project window:
1. Enter the name of your project in the Project Filename field.
2. Type the pathname where you want to store it.
By default, this is the pathname you entered for your workspace.
3. Select your toolset (ST Assembler/Linker, Cosmic C or Metrowerks C) from the
Toolchain list box.
4. Enter the pathname for your toolset by typing the path or using the Browse button to
find it.
5. Click on OK.
The Select an MCU dialog box opens.
2.2.3 Specify a target MCU for your project
In the MCU Selection dialog box:
1. Choose the target device for your application from the complete list of supported
MCUs.
2. Click on Select.
The name of the MCU appears in the Selected MCU field.
3. Click on OK.
Your new workspace and project are created. Only the project is associated with the
selected MCU. Your, workspace can contain multiple projects that are to be built for
different target MCUs.