User manual

Getting started with STVD UM0036
24/385 Doc ID 7705 Rev 11
Note: Workspace files for previous versions of STVD (.wsp) can be opened in STVD 3.0 and later
versions. For information on migrating your workspaces to the new workspace format, refer
to Migrating old workspaces (STVD7 2.5.4 and prior versions) on page 71.
With the Create Workspace with New Project wizard you can quickly and easily:
● Create a new workspace
● Create a project in your workspace
● Specify a target MCU for your project
2.2.1 Create a new workspace
Create a new workspace by selecting File > New Workspace. The New Workspace
window opens. Here, select the Create Workspace and Project icon and click on OK.
Note: For information on creating workspaces from a project, an executable file or a makefile, refer
to Section 4.2.2: Creating a new workspace on page 78.
Figure 1. New Workspace window
In the New Workspace window:
1. Enter the name in the Workspace Filename field.
2. Enter the pathname where you want to store your workspace by typing it, or using the
Browse button to locate a file. Click on the Create a New Folder button if you need to
create a folder for your workspace, then enter the new folder name in the pop-up
window.
3. Click on OK, and the New Project window opens.