User manual

In-circuit debugging UM0036
236/385 Doc ID 7705 Rev 11
SWIM debugger limitation
While the microcontroller is executing either a "Halt", "WFI" or "WFE" instruction, or
protected code, no core resource is accessible for the debugger. As a result, the debugger
looses any control over the core while it remains in this state (especially, no possibility to
stop it or make it leave this state), and read/write on the fly is no longer possible during this
period.
ST7FLITES2/5 FF12-FFDF
ST7FLITE02/5/9 FF12-FFDF
Table 72. Flash memory limitation on HDFlash devices (continued)
Affected microcontrollers Address range of reserved memory zone