User manual

Simulator features UM0036
220/385 Doc ID 7705 Rev 11
Figure 160. Select items for printing
2. Select the items that you want to print. To select all the items in a display tab, place a
checkmark next to the corresponding folder. Otherwise, place a checkmark next to
each item or sub-item that you want to print.
The items that you select are placed in the Selected field. The checkbox next to a
folder or item is blue if any items or sub-items that they contain are selected for
exporting.
3. Enter the time range that you want to print. Three options are available:
– All: prints the selected items for the full interval of the plotted simulation.
– From time ____ to time ____: prints the selected items within the interval that
you specify. Times are specified in nanoseconds.
– Current view: prints the selected items within the interval that is displayed in the
current view.
4. Select your printer.
5. Click on Print.
6.4 Using read/write on-the-fly
The Read/Write on the Fly option permits you to non-intrusively read or write a value in the
RAM memory of the simulated microcontroller while the application is executing.
When this option is selected in either the Memory window or the Watch window, all of the
memory entries shown in the window are constantly refreshed while the program is running.
In these windows, the background turns yellow if the Read/Write on the Fly option is active.