User manual

Basic debugging features UM0036
182/385 Doc ID 7705 Rev 11
Figure 126. Fill Memory dialog box
Note: Memory may also be modified directly by typing over the values required. Care should be
taken in this operation as the replacement values are written directly to memory.
● File: Allows access to two options: Save layout and Restore layout. Using these
options, the contents of the Memory window can be saved to a file, or previously saved
layouts can be restored from a file.
To save a memory layout, perform the following steps:
a) Select File>Save layout from the contextual menu. The Save Memory to File
dialog box opens as shown in Figure 127.
Figure 127. Save Memory to File dialog box
b) Enter the memory Address Range that you want to save to file.
You can either specify the range between two addresses, or simply specify the
starting address and the length of the memory range.
c) Enter the name of the file and the type of the file that you want to save your
memory layout to.
Memory contents can be saved as either *.s19 or *.hex files. Alternatively, you
may browse for an existing file of either type (*.s19 or *.hex).
d) Click OK to save your memory layout.