User manual

UM0036 Basic debugging features
Doc ID 7705 Rev 11 161/385
5.1 Selecting the debug instrument
Your choice of target microcontroller and debugging hardware determine what features you
will have access to when debugging. In the Debug Instrument Settings window you can:
● Identify your debug instrument and the port it is connected to
● and Add communication ports
5.1.1 Identify your debug instrument
To identify your debug instrument for STVD:
1. Select Debug Instrument>Target Settings from the main menu bar.
Figure 103. Identify debug instrument and connection
2. Select the appropriate option for your debugging hardware in the Debug Instrument
Selection list box. Tabl e 58 describes the available options.
Table 58. Debug instrument types
Selection in STVD Applicable development tools
DVP2 If you have an ST7-DVP2 series emulator
DVP3 If you have an ST7-DVP3 series emulator
EMU3 If you have an ST7-EMU3 series emulator
EMU2B (HDS2) If you have an ST7-EMU2 (also known as HDS2) series emulator.
ICD (ST Micro Connect or
DVP3)
If you are using an ST7-ICD (STMC) debugger, the EMU3 emulator
with ICC add-on, or the DVP3 emulator for in-circuit debugging.
ICD RLINK
If you are using the Raisonance RLink for in-circuit debugging over
ICC.
ICD STICK If you are using the ST7 STICK for in-circuit debugging over ICC.
SIMULATOR If you are not using any debugging hardware.