User manual

Project creation and build UM0036
130/385 Doc ID 7705 Rev 11
Figure 87. Raisonance linker output view
The following options are available in this view:
● Generate map file
You can generate a map file by checking this option and entering a map file name in the
field provided. By default, this option is checked, and a map file is generated with the
output path name and the extension .map.
The available map file options are described in Table 46. By default, all options are
turned on. You can use the list to turn each one off individually.
● Generate a cross-reference file
This checkbox instructs the linker to generate a cross-reference file as an aid to
debugging.
● User defined options
The User Defined Options field allows you to enter the command for an option that
you want to apply when generating the linker output. The options that you type in this
field are immediately added to the command line below. For information on creating
user-defined options, refer to the Raisonance ST7 Linker/Locator Manual.
Table 46. Raisonance linker output options
Directive Description
(1)
1. For complete descriptions of linker output options, refer to the Raisonance ST7 Linker/Locator Manual.
NOLI Omits source code lines from the symbol table in the map file
NOPU Omits public symbols from the symbol table in the map file
NOSB Omits local symbols from the symbol table in the map file
NOMA Omits the link map from the map file