User manual

UM0036 Project creation and build
Doc ID 7705 Rev 11 129/385
Customizing Raisonance linker input settings
On the Linker tab of the Project Settings window, in the Category field, select Input to
display the view shown in Figure 86.
Figure 86. Raisonance linker input view
Note that variables are automatically allocated a memory location. For information on
memory relocation directives, refer to the Raisonance ST7 Linker/Locator Manual.
The Relocation Directives field allows you to directly enter relocation directives using the
syntax defined in the Raisonance ST7 Linker/Locator Manual.
The User Defined Options field allows you to enter the command for an option that you
want to apply when generating the linker input. The options that you type in this field are
immediately added to the command line below. For information on creating user-defined
options, refer to the Raisonance ST7 Linker/Locator Manual.
Customizing Raisonance linker output settings
On the Linker tab of the Project Settings window, in the Category field, select Output to
display the view shown in Figure 87.