User's Manual

Visteon Confidential
../ULCR Users Manual v0.9.doc Pg 9 of 13
[PHONE] BUTTON FUNCTIONS
Pressing the [PHONE] button places the AHU into Phone Mode and displays the BT User Friendly Name of the connected phone.
Subsequent pressing of the [PHONE] button cycles through the following information for the connected phone:
BT User Friendly Name
Signal Strength
Battery Level
Cellular Carrier
PHONE [MENU] BUTTON FEATURES
The following features are selectable via the [MENU] button when the selected source is PHONE
REDIAL (only available if a paired device is connected)
Redial the previously dialed phone number.
1. Press [PHONE] to place the AHU into Phone Mode
2. Press [MENU] until REDIAL is displayed
3. Press [►║OK] – CONNECTING followed by the Phonebook Contact Name, or Phone Number, of the number being dialed will be displayed.
PHONEBOOK (only available if a paired device is connected)
Access the contacts of the phonebook of the currently connected phone.
1. Press [PHONE] to place the AHU into Phone Mode
2. Press [MENU] until PHONEBOOK is displayed
3. Press [►║OK] to select Phonebook
If the Phonebook has already been downloaded, the first entry (alphabetically) will be displayed
4a1. Press [▼] or [▲] to browse through the list of phonebook contacts individually OR
4a2. Press [Preset 2] to quick-jump to the 1
st
entry that begins with the letter [A] B C. Press [Preset 2] again for A [B] C then again for A B [C]
: :
4a9. Press [Preset 9] to quick-jump to the 1
st
entry that begins with the letter [W] X Y Z
5a. Press [►║OK] or [
│◄◄ ] (Seek Down) to dial the selected contact
If the Phonebook has not already been downloaded, LOAD PHONEBK will be displayed.
4b. Press [►║OK] to download the phonebook - YES will be displayed
5b. Press [►║OK] to confirm – DOWNLOADING will be displayed
This will be followed by DOWNLOADED if the attempt to download was successful or FAILED if the attempt was not successful.
6b. The BT User Friendly Name of the paired device will be displayed.